SUPER MICRO SINGLE XEON, CORE I7 GRAPHIC MB X9SRA ( SLI SUPPORT)
Product Description
Product SKUs
MBD-X9SRA -B
X9SRA (Bulk Pack)
Physical Stats
Form Factor
ATX
Dimensions
12″ x 9.6″, (30.48cm x 24.4 cm)
Processor/Cache
CPU
Intel® Xeon® processor E5-2600/1600
and E5-2600/1600 v2 family†
(up to 12 cores and up to 150W)
Single Socket R (LGA 2011)
and E5-2600/1600 v2 family†
(up to 12 cores and up to 150W)
Single Socket R (LGA 2011)
Note
† BIOS version 3.0 or above is required
† BIOS version 3.0 or above is required
CPU
Intel® Core i7 v2/v3 Extreme / Performance LGA 2011 processors with Non-ECC UDIMM only
System Memory
Memory Capacity
8x 240-pin DDR3 DIMM sockets
Up to 512GB DDR3 ECC LRDIMM
Up to 256GB DDR3 ECC RDIMM
Up to 64GB DDR3 ECC/non-ECC UDIMM
Up to 512GB DDR3 ECC LRDIMM
Up to 256GB DDR3 ECC RDIMM
Up to 64GB DDR3 ECC/non-ECC UDIMM
Memory Type
1866/1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
64GB LRDIMM
64GB LRDIMM
Memory Voltage
1.5 V, 1.35 V
Error Detection
Corrects single-bit errors
Detects double-bit errors
(using ECC memory)
Detects double-bit errors
(using ECC memory)
On-Board Devices
Chipset
Intel C602 chipset
SATA
SATA3 (6Gb/s) and SATA2 (3Gb/s)
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 5, 10 support (Linux)
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 5, 10 support (Linux)
Network Controllers
Intel® 82579LM and 82574L, 2x Gigabit LAN ports
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Audio
RealTek ALC889 7.1 High Definition Audio with S/PDIF header
Super I/O
Winbond
Input / Output
SATA
2x SATA 3.0 ports (6Gb/s)
4x SATA 2.0 ports (3Gb/s)
4x SATA 2.0 ports (3Gb/s)
SCU
4x SATA 2.0 ports (3Gb/s) via SCU
LAN
2x RJ45 Gigabit Ethernet LAN ports
USB
4x USB 3.0 ports (5Gbps)
14x USB 2.0 ports total (8x rear + 6x via header)
14x USB 2.0 ports total (8x rear + 6x via header)
Audio
Line-in / Line-out / Microphone Ports
Keyboard/Mouse
PS/2 Keyboard/Mouse port
Serial Port / Header
2x headers
OS Compatibility
• Please reference the OS Compatibility Chart for details
Chassis ( Optimized for X9SRA )
Mid-Tower
CSE-732D4-903B
Important Chassis Notes
To support motherboards based on Intel® Xeon® processor 5500/3500 series, Revision K or later chassis is recommended for most models. Please talk to your sales representative for details.
Expansion Slots
PCI-E / PCI
2x PCI-E 3.0 x16 slots
1x PCI-E 3.0 x4 (in x8) slot
1x PCI-E 2.0 x4 (in x8) slot
1x PCI-32 slot
1x PCI-E 3.0 x4 (in x8) slot
1x PCI-E 2.0 x4 (in x8) slot
1x PCI-32 slot
System BIOS
BIOS Type
64Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
Plug and Play (PnP)
APM 1.2
DMI 2.3
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
Hardware BIOS Virus protection
SMBIOS 2.7.1
UEFI 2.3.1
RTC (Real Time Clock) Wakeup
APM 1.2
DMI 2.3
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
Hardware BIOS Virus protection
SMBIOS 2.7.1
UEFI 2.3.1
RTC (Real Time Clock) Wakeup
Management
Software
SuperDoctor® III
Watch Dog
NMI
Watch Dog
NMI
Power Configurations
ACPI / APM Power Management
Keyboard Wakeup from Soft-Off
CPU Fan auto-off in sleep mode
Power-on mode for AC power recovery
Keyboard Wakeup from Soft-Off
CPU Fan auto-off in sleep mode
Power-on mode for AC power recovery
PC Health Monitoring
Voltage
Monitors for CPU Cores, +3.3V, +5V, ±12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
Total of five 4-pin fan headers supporting up to 5 fans
5 fans w/ tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
5 fans w/ tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
CPU thermal trip support
I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED
CPU / System Overheat LED
Suspend static indicator LED
UID/Remote UID
Suspend static indicator LED
UID/Remote UID
Other Features
Chassis intrusion detection
Chassis intrusion header
Chipkill support
RoHS, Halogen Free
Chassis intrusion header
Chipkill support
RoHS, Halogen Free
Operating Environment
Operating Temperature Range
10°C – 35°C (50°F – 95°F)
Non-Operating Temperature Range
-40°C – 70°C (-40°F – 158°F)
Operating Relative Humidity Range
8% – 90% (non-condensing)
Non-Operating Relative Humidity Range
5% – 95% (non-condensing)
No comments:
Post a Comment