Product Description

COOLER MASTER Silent Pro M2 850W

Copper-Aluminum Heat Sink
This slick CM design incorporates an expansive flat surface area for superior heat conductivity out to the aero-dynamic fins, therefore removing heat at an unprecedented rate.
Silent Operation
135 mm Hydraulic Dynamic Bearing Fan for quieter operation
Single 12V Power Rail
Single 12 V Power Rail Tackling challenges from the most power-intensive peripherals head on, this solitary 12 V power rail provides ample power and strong resistance to any overloading up to 68A.
Modularized Cabling
Neatly arranged connectors on the rear plate connect to flat internal cabling improve installment facility while allowing for greater airflow through the PSU.
Intel Compliant
Proficiently prepared to provide a stable power source and connectors for the latest ATX 12V v2.3 Intel processors.
Eco-friendly design: Erp Lot6 Ready!
A maximum 5Vsb current draw target in S5 off-mode of 0.1A for its motherboards and needed to ensure the system will consume < 1W in its off-mode
And More
– Multiple updated connectors for all types of interfaces (PCIe, SATA etc.)
– Double-Layer EMI Filter Dual protection from electromagnetic interference.
– Multiple Protection Design (OVP/UVP/OPP/OTP/SCP)
– High reliability with an MBTF of at least 100,000 hours of use.
– Five Year Warranty.

Model	RS-850-SPM2
Type	Intel Form Factor ATX 12V V2.3
Dimension (W x L x H)	150 x 180 x 86mm 5.9 x 7.1 x 3.4 inch
Input Voltage	90-264Vac (Auto Range)
Input Current	11 – 5.5A
Input Frequency Range	47 – 63Hz
PFC	Active PFC (>0.9)
Power Good Signal	100-500ms
Hold Up Time	>17ms
Efficiency	88% Typically
MTBF	100,000 Hours
Protection	OVP/UVP/OCP/OPP/OTP/SCP
Output Capacity	850W
Operation Temperature	0~40°C (Nominal Input Voltage)
Regulatory	TUV / CE / UL / FCC / BSMI / GOST / C-tick / KC / CCC
Fan	135mm Hydraulic Dynamic Bearings
Certifications	80 Plus Silver
Connector	M/B 24 Pin Connector x 1 CPU 4+4 Pin x 2 PCI-E 6+2 Pin x 6 SATA x 12 4 Pin Peripheral x 5 4 Pin Floppy x 1